Place the regulator’s first stage DIN connector into the opening of the tank valve and screw it in place by rotating the black knob.Ī) If your tank has a yoke valve and you have a DIN connector in your regulator’s first stage, there’s no need to worry….! It does not look like an A-Frame.īest way to identify a matching scuba tank for this regulator is the tank valve will have a large threaded opening and will not have an o-ring. The DIN connector comes with an integrated o-ring and is well protected. While these are more widely used in areas outside of the US like Europe, they are also becoming more popular with recreational divers in the US and Canada as they are much more versatile to types of diving.īest way to identify this type of regulator: These regulators are popular among technical divers who do deep diving, cave diving, and cold water diving because of a better connection between the regulator and the tank. You first remove the black rubber dust cap, and place the regulator’s first stage with the connected yoke valve over the tank valve and simply tighten the screw that’s attached to the black knob by hand. How to connect this regulator to the scuba tank: The best way to identify a matching scuba tank for this type of regulator is you should be able to visibly see an o-ring that’s placed in the scuba tank’s valve groove. The Yoke Valve connector will have the appearance of an A-Clamp frame. Wondering how to tell what type of regulator and scuba tank you have? When you go to your dive shop or go online you’ll see there are regulators with a yoke valve fitting and regulators with a DIN valve fitting. There are 2 types of connectors that you can connect your regulator’s first stage to your scuba tank. It controls the high pressure of compressed air that’s in the tank by reducing it to an intermediate pressure and directing it to its other pressure hoses. The First Stage of the regulator connects to the scuba tank valve. The regulator has 5 major features vital for it to perform properly and safely for you.ĥ) SPG (Submersible Pressure Gauge) The First Stage Keep these 2 things in mind as we move along… 5 Main Components of a Dive Regulator There are 2 types of valves that can be on a tank…. If you’re a recreational diver, your tank is filled with compressed purified air which is about 20.9% oxygen. A scuba tank is made from either aluminum or steel. How to Choose Your Dive Regulator That’s Right For You!īecause i’m going to be mentioning scuba tanks, let me first tell you briefly what a scuba tank is.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |